Then set the resolution, the frame rate and the bitrate. Go to the “Encoding &Stream” page, and click “Encoding and Stream Settings”.Ĭlick “setting” under the “H.264 Main Stream” to enter the encoding parameter configuration page. If the image is dynamically changing frame by frame, it means the video is feeding, if it shows blue screen or still image, pls check the interface and the video source. And then fill in the username and password (The default username and password be admin), and then click “Login”.Ĥ.1 Confirm whether the video source is properly connectedĬheck the preview image at the “Motion-JPEG stream”. Open the web browser (Chrome and Firefox are recommended), directly input the encoder’s IP address (default is 192.168.1.168) and press “Enter” to open the login interface. Make sure you configure the encoder and computer in the same network segment so that the computer can access to the web page of the encoder, for example, 192.168.1.100.(pls watch the following video to change the IP address of the computer) The default IP address of the encoder is 192.168.1.168. Login to the web management page of the encoder with default IP address Step 4: Connect the video source to the encoderģ. Step 3: Connect the other end of the ethernet cable to the computer Step 2: Connect the ethernet cable to the encoder Step 1: Connect the power supply to the encoder Connect the encoder to the computer via ethernet cable, and connect the video source, power supply to the encoder at the same time, and then: If you get an IP address with DHCP, this step can be skipped.Ģ.
BEST WAY TO CONNECT MEGASEG TO ENCODER STREAMING HOW TO
(pls watch our another video for detailed steps: how to find available IP address) Or to find available IP address via ping command by yourself. Prepare an IP address for the encoder to connect to the external networkĬontact the network management person for an IP address and gateway and record it. Let’s take the live streaming with RTMP protocol as an example to briefly demonstrate the operation steps and notes.ġ. After getting a video encoder, how do you login to the device and configure parameters?
0 kommentar(er)
